The New “Quick-Release Vacuum System”® is
an innovative design allowing the user to easily remove
the vacuum system and seal bar for simplified cleaning,
sterilization and maintenance. The new vacuum and seal
bar design accommodates a pouch with as little as 1” header
space.
The New linear element tensioner has no exposed electrical
connections, won’t allow binding and assures
element tension under all pressure settings. The new
design simplifies element replacement and extends element
life.
| Seal Length |
8", 11", 16" |
| Seal Width |
1/4" , 3/8" |
| Vacuum Pressure |
Up to 26 in Hg Standard |
| Suction Flow |
3.2 @ 80 psi |
| Machine Length |
13.5" |
| Machine Width |
16.5" |
| Machine Height |
20" |
| Approx Weight |
75 lbs. |
| Power Requirements |
120V or 220V |
| Air Requirements |
90-110 psi |
8000 Series Features
- Full Digital, High-Speed, PLC Controller with Color
enhanced LCD Touch screen HMI.
- Password protected digital control of:
- All Seal parameters; temperature, time, pressure
- Process Recipes
- Alarm Settings
- Calibration Screens
- Multiple Operating Modes:
- Gas-Vac-Seal (1-99 cycles)
- Vac-Seal
- Seal Only
- Vac-Gas-Vac-Seal
- Vac-Gas-Seal (1-99 Cycles)
- “Quick-Release Vacuum System”® Easily Release the Vacuum and seal bar(s) for cleaning,
sterilization and maintenance
- Visible and Audible Alarms:
- Cold Seal Temperature Profile
- Jaw Obstruction
- Seal Temperature with Settable High & Low
Alarms
- Seal Pressure with Settable High and Low Alarms
- NEMA 4X Stainless Steel Enclosure - Laser cut and
welded seams allow for cleaning and resists the effects
of harsh biocides
- Gas Purge Standard
- High-Flow, Retracting Vacuum Nozzle
- Upper and Lower Heating elements
- High Pressure Seal Jaws with Guided Cylinder
- Electronic Footswitch Activator
- Linear Element Tensioner:
- New Element Tension Design Eliminates Hot Ends
- Reduces Element Buckling
- Easier to Maintenance
- External Verification Ports for Calibration of:
- Seal Temperature
- Seal Time
- Seal Pressure
- Gas Pressure
- Safety Features
- Emergency Stop
- Safe Low Pressure Jaw Close
- Internal ‘coyote’ high temperature
limit
- Thermal overload protection
- CLEANROOM FEATURES
- Non-Particle generating Venturi Vacuum System
- Isolated Exhaust Port
- Clean Design to Class 100
- Disposable vacuum line from nozzle to filter
- OPTIONS
- Vacuum Particle Filter
- Vacuum Moisture/ liquid Filter
- Exhaust Silencer
- 220VAC Conversion
- CE Certification
- Initial Calibration
