Surface Resistance Test Meters

Testing and verifying ESD devices is an essential part of your quality program, and required to comply with EIA 625. Test equipment offered by Texas Technologies is reliable and easy to use.

SR METER - Surface Resistance / Resistivity RTG Meter

The SCC-625 SR Meter is a wide-range, multi-scale, auto-ranging meter. It measures resistivity per ASTM D257, resistance per EOS/ESD S11.11, and Resistance to Ground (RTG). Appropriate for auditing static control items. Measures conductive, dissipative and insulative items. The meter is battery powered and simple to use. High-Speed electronics provide repeatable measurements.

Useful for audit testing required by AMSE/ESD S-20.20, EIA 625, Mil-STD-1686.

View PDF Data Sheet for SR Meter (SCC-625) (opens new window)

Purchase SR Meter (SCC-625) securely online

SR Meter (SCC-625) Properties

Item	Typical properties
Measurement	103 to 1012 ohm/square ASTM D257 102 to 1011ohm EOS/ESD 11.11
Resolution	One order of magnitude
Accuracy	±1/2 decade
Power	9 Volt battery
Electrodes	Parallel bar
Weight	6.2 oz
Size	4.5" H x 2.7" W x 1.0"D
includes: meter, case, cable, instructions and certificate

 

---

3M™ Test Kit 701 For Static Control Surfaces

The 3M Test Kit 701 Contains A Lightweight, User-Friendly Meg ohmmeter Plus All Of The Components Needed To Make Testing Mats And Other Surfaces Simple And Accurate. All Of The Items Are Packaged In A Foam-Lined Carrying Case.

The kit meets the intent of ANSI/ESD Standard 4.1, "Work surfaces - Resistive Characterization," ANSI/ESD Standard 7.1, "Floor Materials - Resistive Characterization of Materials," and MIL-PRF-87893, "Workstation, and Electrostatic Discharge (ESD) Control"

The meter has separate scales and test settings for measuring surface-to-ground and surface-to-surface resistance at two prescribed test voltages (10V and 100V), and system continuity. The easy-to-read scales are both color-coded and numbered.

Kit Contains:

• 1 Meg ohmmeter
• 2 Test Weights, 5 lbs
• 2 Test Leads, 10 ft.
• 1 Insulated bulldog clip
• 1 Alligator Clip

• 1 Continuity Test Plate
• 2 Batteries (22.5V and 1.5V)
• 1 Operator's Manual
• 1 Molded Carrying Case

View PDF Data Sheet for 3M™ model 701 Test Kit (opens new window)

Purchase 3M™ model 701 Test Kit securely online

701 Test Kit Component Properties

product	item	Typical properties
Meter	Weight	12 oz
	Dimensions	1.8" H x 3.3" W x 4.6" L
	Resistance Ranges:
	Continuity Test Mode	0-10M ohm (internal R=500K ohm)
	10 V Surface Test Mode	105 - 1011 ohm (internal R=2 M ohm)
	100 V Surface Test Mode	105 - 1011 ohm (internal R=2 M ohm)
Weights	2 test weights	5 pounds each
	Dimensions	2.5"dia x 5.06" tall, includes handle and pad
	Pad Material	Conductive silicone Rubber
	Pad Dimensions	2.5" dia x 2.5" thick
Leads	Length	10 foot (3.05m)
	Wire Size	18 gauge
	Insulation	Silicone Rubber
	Diameter	0.125" (0.32cm)
includes: meter, case, weights, leads, test plate, clips and operating instructions

 

Home  |  Product Listing  |  Sales Policy  |  Information Request  |  Privacy Policy  |  Site Map