Cortec VpCI emitting devices are designed for use in interior enclosures that are covered, closed or sealed. Cortec’s VpCI technology provides multi-metal protection against rust, corrosion, oxidation, and tarnishing. Cortec’s VpCI Protection system can be used in both indoor and outdoor confined space applications. Length of protection depends on integrity of sealing and atmospheric conditions.
Install Emitters per Specification:
- VpCI-101 – Protects up to1 cubic foot protection
- VpCI-105 – Protects up to 5 cubic feet protection
- VpCI-111 – Protects up to 11 cubic feet protection
VpCI® Emitters Product Selection Guide
Small Package Emitters
Cor-Pak® 1-MUL Pouches
Provides efficient protection for ferrous and non-ferrous materials within a package. The VpCI® vaporizes and then condenses on all metal surfaces protecting all areas of the metal product. Each Cor-Pak® 1-MUL Pouch protects up to 1 cubic foot (28 L).
Stock: 2.50″ x 2.75″ x 0.06″ (5.7 cm x 5.1 cm x 0.15 cm)
An extremely efficient dry method of protecting metals within a package. Using Vapor phase Corrosion Inhibitor Technology, these easy-to-use tablets provide up to 24 months of corrosion protection for ferrous and non-ferrous metals. They are nitrite, phosphate, and silicate free. Protects up to 1 cubic foot (28 L).
Stock: 1,000 tablets per bottle 4 bottles per carton 9.2 lbs (4.17 kg) per carton
Designed to provide corrosion protection for metal components and parts enclosed in non-ven- tilated control boxes, cabinets, or tool boxes. A VpCI®-101 device protects up to 1 cubic foot (28 L) in volume. These self-adhesive devices are simple and convenient to install.
Stock: 3″ x 1 .25″ x 0.25″ (7.6 cm x 3.2 cm x 0.6cm)
VpCI®-143 Paper Emitters
Fully recyclable/repulpable neutral/natural kraft linerboard squares coated with VpCI® coating on two sides for fast Vapor phase Corrosion Inhibitor protection of ferrous and non-ferrous metals. Insert approximately one 1 x 1 inch (6.45 cm2) emitter into package for every 25 cubic inches (410 cm3) of void space needing protection.
Stock: 1″ x 1″ (2.54 cm x 2.54 cm) Custom: 1-52″ x 1-56″ (2.54-132 cm x 2.54-142 cm)
Large Volume Emitters
A biobased pad that emits Vapor phase Corrosion Inhibitors out of a vented cardboard box. An easy way to protect valuable multi-metal components or parts in an enclosed space up to 50 cubic feet (1.4 m3).
Custom order product. Contact your regional sales representative for sizing and lead times.
EcoPouch® contains VpCI®-609 powder for corrosion protection of ferrous metals. Insert into packages or metal powder drums as an extra-strength source of VpCI® for protection of large volumes (protects up to 35.3 cubic feet [1 m3]). Not for use with yellow metals.
Stock 6” x 10” x 0.5” (15.3 cm x 25.4 cm x 1.3 cm) pouch- es, 50 per carton.
Contains VpCI®-308 powder for corrosion protection of ferrous and yellow metals. Insert into packaging as an extra-strength source of VpCI® for protection of large volumes (protects up to 35.3 cubic feet [1 m3]). Each pouch is 6” x 10” x 0.5” (15.3 cm x 25.4 cm x 1.3 cm).
Stock 6” x 10” x 0.5” (15.3 cm x 25.4 cm x 1.3 cm) pouch- es, 50 per carton.
Contains VpCI®-309 powder for corrosion protection of ferrous metals. Not aggressive to yellow metals. Insert into packaging as an extra-strength source of VpCI® for protection of large volumes (protects up to 35.3 cubic feet [1 m3]). Each pouch is 6” x 10” x 0.5” (15.3 cm x 25.4 cm x 1.3 cm).
Made to order 6” x 10” x 0.5” (15.3 cm x 25.4 cm x 1.3 cm) pouch- es, 50 per carton.
A flexible corrosion inhibiting device constructed from biobased non-woven material. It pro- vides an extra-strength source of VpCI® for corrosion protection of large volumes. Bio-Pad® 2” x 6” protects up to 1.5 cubic feet (42 L) per unit. Bio-Pad® 8” x 8” protects up to 8 cubic feet (0.23 m3) per unit. Bio-Pad® roll protects up to 15 ft3 per ft2 of material (4.5 m3/m2).
2″ x 6″ (5 cm x 15.24 cm), 8″ x 8″ (20.32 cm x 20.32 cm), and custom rolls.
VpCI®-130 Series foam is a unique flexible packaging material that combines VpCI® protection, desiccant action, and antistatic capabilities in one product. Metal parts packaged with VpCI®-130 Series foam receive continuous protection from the corrosive effects of humidity, condensation, aggressive industrial atmospheres, dissimilar metal corrosion, and salt air.
Various stock sizes.
Cortec® VpCI®-105 emitters are unique devices designed to provide corrosion protection for metal components and parts enclosed in non-ventilated control boxes, cabinets, or tool boxes up to 5 cubic feet (0.14 m3).
Stock: 2.25″ x 0.75″ (5.7 cm x 1.9 cm)
VpCI®-111 emitters are unique devices designed to provide corrosion protection for metal components and parts enclosed in non-ventilated control boxes, cabinets, or tool boxes up to 11 cubic feet (0.31 m3).
Stock: 2.25″” x 1.25″ (5.7 cm x 3.2 cm).
CorroLogic® Tube Strips powered by Nano VpCI®
CorroLogic® Tube Strips powered by Nano VpCI® make it possible to protect the interior of a tube or pipe against corrosion without expensive internal coatings. The flexible strips have a 1/3 inch diameter (8.5 mm). They are extruded from low density polyethylene containing a pro- prietary VpCI® compound designed for protection of ferrous and non-ferrous metals and alloys. Strips should be cut to length and placed inside the pipes or tubes, which are then capped to trap the protective vapors inside. Not recommended for pipe diameters greater than 6 inches (15.2 cm).
Stock: 1/3″ x 500′ (0.84 cm x 152.4 m)
VpCI®-150 Adhesive Backed Foam Tape
VpCI®-150 foam tape protects metal in enclosed spaces from corrosion. These unique tapes also provide antistatic protection. Protects 0.4 cubic feet (11.3 L) per linear inch (2.5 cm).
Stock rolls: 12′ x 0.75″ x 0.25″ (3.7 m x 1.9 m x 0.6 cm)
VpCI®-170 Adhesive Backed Foam Tape
VpCI®-170 foam tape protects metal in enclosed spaces from corrosion. These unique tapes also provide antistatic protection. Protects 1 cubic foot (28.3 L) per linear inch (2.5 cm).
Stock: 20′ x 2″ x 0.25″ (6.1 m x 5.1 cm x 0.6 cm)
Cortec VpCI Emitters
Cortec VCI emitters are small, patented foam emitters through which the corrosion inhibitor is slowly released and moisture and air pollutants can enter to be absorbed. It provides long-term protection against corrosion even in the presence of adverse conditions including salt, moisture, airborne contaminants, H2S, SO2, NH3 and others.
The VpCI-101 can be effectively used for all operating, packaged and stored electrical equipment, marine navigation and communication equipment, aerospace electrical controls, electric motors, switching equipment, fuse boxes, power boxes, medical equipment, electrical wire ways, terminal boxes, scientific and measuring instruments, telecommunications equipment and remote electronics devices.
|15000007||Cortec VpCI 101 Emitters||50 Per Carton||$147.50||cortec-vpci-emitters corrosion-control-store-categories vpci-emitters store-categories root-catalog|
|15000092||Cortec VpCI 105 Emitters||20 Per Carton||$139.50||cortec-vpci-emitters corrosion-control-store-categories vpci-emitters store-categories root-catalog|
|15000386||Cortec VpCI 111 Emitters||10 Per Carton||$120.50||cortec-vpci-emitters corrosion-control-store-categories vpci-emitters store-categories root-catalog|
Cortec VpCI Pipe Strip
Cortec Cor-Pak Pipe Strip is designed for protection f tubes, pipes or conduits in storage or during shipping. Using VpCI technology, Cor-Pak Pipe Strip makes it possible to protect the interior of a tube or pipe against corrosion without expensive internal coatings. The flexible strip comes on a 500 foot roll and is 1/3″ in diameter. It is extruded from low density polyethylene containing a proprietary VpCI compound designed for protection of ferrous and non-ferrous metals and alloys. It is especially effective on more expensive stainless steel and aluminum pipes.
|20800070||Cor-Pak VpCI Pipe Strip 1/3" X 500'||1 Reel||$161.50||cortec-vpci-pipe-strip corrosion-control-store-categories vpci-emitters store-categories root-catalog|
Cortec VpCI Foam Strips
Description: Unique, flexible packaging materials that combine VpCI® protection, cushioning and desiccant action, plus excellent antistatic capabilities! Cortec® VpCI®-130 Series Foams provide effective corrosion protection, cushioning and desiccant action all in one step. You can now eliminate expensive and messy rust preventatives with the unique Cortec® VpCI®-130 Series Foams. Parts protected with Cortec® VpCI®-130 Series Foams are always ready for use, no degreasing or coating removal is required. Application of multifunctional materials such as Cortec® VpCI®-130 Series Foams results in significant weight and labor savings.
Application: Cortec® VpCI®-130 Series Foams are specially designed with vapor corrosion inhibitor impregnated throughout the foam’s polymeric matrix. They are excellent for protection of ferrous, non-ferrous metals and alloys such as: steel, copper, brass, aluminum, zinc, solder, silver, etc. Cortec® VpCI®-130 Series Foams do not change critical physical and/or chemical properties of electronic components, and are suitable for protection of printed curcuit boards.
Install Foam Squares per Specification
131 – Protects up to 1.5 cubic feet
132 – Protects up to 8 cubic feet
133 – Protects up to 0.25 cubit feet
136 – Protects up to 0.25 cubic feet
137 – Protects up to 10 cubic feet
National Stock Number – #3850-01- 426-3539
METALS PROTECTED (MULTI-METAL)
STORAGE AND PACKAGING
VpCI®-130 Series Foam has a shelf life of 2 years when sealed in the original package. To maintain VpCI® strength, unused foam should be kept sealed in plastic bags.
|10500016||Cortec VpCI 1 MUL Emitters 2.50"x2.75"x0.06"||300 Per Case||$391.50||cortec-vpci-foam-strips vpci-emitters corrosion-control-store-categories store-categories root-catalog|
|10500206||Cortec VpCI 131 FOAM Emitters 2"X10"X0.25"||250||$221.75||cortec-vpci-foam-strips corrosion-control-store-categories vpci-emitters store-categories root-catalog|
|10500011||Cortec VpCI 132 FOAM Emitters 10"X10"X0.25"||250||$901.50||cortec-vpci-foam-strips corrosion-control-store-categories vpci-emitters store-categories root-catalog|
|15000009||Cortec VpCI 133 W/Adhesive FOAM Emitters 1"X1"X.025||1000||$325.50||cortec-vpci-foam-strips corrosion-control-store-categories vpci-emitters store-categories root-catalog|
|15003083||Cortec VpCI 136 FOAM Emitters 1"X1"X0.25||1000||$122.50||cortec-vpci-foam-strips corrosion-control-store-categories vpci-emitters store-categories root-catalog|
|10502650||Cortec VpCI 137 FOAM Emitters 132'X54"X0.25"||1 Roll||$1,736.50||cortec-vpci-foam-strips corrosion-control-store-categories vpci-emitters store-categories root-catalog|
|15000013||Cortec VpCI 150 FOAM Emitters 12'X0.75"X0.25"||6 Rolls||$297.50||cortec-vpci-foam-strips corrosion-control-store-categories vpci-emitters store-categories root-catalog|
|15000014||Cortec VpCI 170 FOAM Emitters 20'X2"X0.25"||1 Roll||$175.50||cortec-vpci-foam-strips corrosion-control-store-categories vpci-emitters store-categories root-catalog|