Shop
Our Product.
-
C10 SERIES CLEAN ESD ARMOR, Static Control, Table Mats
C10 SERIES CLEAN ESD ARMOR – Part # 770786 – 0.040′ x 30″ x 50′
$1,520.50 Add to cartC10 SERIES CLEAN ESD ARMOR – Part # 770786 – 0.040′ x 30″ x 50′
$1,520.50
SKU: 770786 Categories: C10 SERIES CLEAN ESD ARMOR, Static Control, Table MatsWhen used with conductive surfaces or ground planes, such as metal trays, carts, shelving, or stainless steel workbenches, the matting provides a protective ESD liner that is ideal for use in controlled environments such as cleanrooms. It is ultra-low outgassing, non-VOC, non-blooming and non-particle generating.
-
Air Ionizers, Benchtop Air Ionizer, Ion Pro Benchtop Ionizer, Static Control
ION PRO BENCHTOP IONIZER – 770116 – 120VAC
$845.25 Add to cartION PRO BENCHTOP IONIZER – 770116 – 120VAC
$845.25
SKU: 770116 Categories: Air Ionizers, Benchtop Air Ionizer, Ion Pro Benchtop Ionizer, Static Control- Steady-state DC Benchtop Ionizer with Ion Gauge™ Technology
Yields optimal neutralization efficiency by utilizing an ion collecting plate to sample both balance and discharge time - Dual-balance Sensors
Applies a resistive sensor to control the balance and a patented capacitive sensor to provide long-term stabilization - Discharge Time Monitoring
Alarms if the ionizer requires maintenance due to inefficient neutralization - Less than 2 Seconds Discharge Time with ±3 Volts Balance
Meets the ANSI/ESD S20.20 required limits for ionization tested per ANSI/ESD STM3.1 and ESD TR53 - Two Speed Fan
Performs consistently at all speeds without ion recombination - Solid Tungsten Emitters
Resists oxidation and melting to maintain sharp points for optimal ionizer performance - Stainless Steel Housing and Multi-Mount Stand
Minimizes foreign object debris, corrosion, and other contaminations when used in clean or sensitive areas - Ethernet Connectivity
Provides network communication with Static Management Program (SMP) to collect and report the status for balance and discharge time - 770118 Daisy Chain Power Cord Accessory
Powers 10 total ionizers in a single chain for multi-point ionizer installations - 770047 Benchtop Ionizer Boom Arm Accessory
Saves workspace by lifting the SCS Ion Pro™ Benchtop Ionizer off the workbench - NIST Calibrated with Certificate Included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration. - Made in the United States of America
This item is made and stocked in Chino, CA
- Steady-state DC Benchtop Ionizer with Ion Gauge™ Technology
-
Cleanroom Socks, Foot Apparel
Pure Comfort Launderable Cleanroom Socks
$1,281.00 Select optionsPure Comfort Launderable Cleanroom Socks
$1,281.00
SKU: Cleanroom Socks Categories: Cleanroom Socks, Foot ApparelPure Comfort Cleanroom Socks are designed to provide all day comfort inside a cleanroom. They are made from 100% polyester to prevent any particle generation while in use.
-
-
- Launderable
- Cleanroom Compatible
- Low Particle Generation
- Color Coded Bands for Visual Size Identification
- Sold in 200 pairs per case
-
-
-
Cleanroom Shoes, Foot Apparel
Pure Stride Cleanroom Shoe Clogs
$576.95 Select optionsPure Stride Cleanroom Shoe Clogs
$576.95
SKU: Cleanroom Clogs Categories: Cleanroom Shoes, Foot ApparelPure Stride Cleanroom Clogs are designed to provide all day comfort for technicians inside a cleanroom.
-
-
- Antistatic
- Autoclavable
- Smooth surface for day long comfort
- Special conical design prevents spilled liquids from entering the clog
- Heel strap
- Anatomic heel basin
- Toe grabber
- Non-slip sole
- Color: White
- 6 pairs per case
- Tested IAW ASTM F2913
- *See Sizing Chart Below
-
-
-
Cleanroom Gloves, Controlled Environment Nitrile Gloves, ESD Apparel, TN2000 Gloves, TN2000W-E Controlled Environment Nitrile Gloves
Controlled Environment Nitrile Gloves – 12″ Ambidextrous White – Large
$320.30 Add to cartControlled Environment Nitrile Gloves – 12″ Ambidextrous White – Large
$320.30
SKU: TN2001W-E Large Controlled Environment Nitrile Gloves Categories: Cleanroom Gloves, Controlled Environment Nitrile Gloves, ESD Apparel, TN2000 Gloves, TN2000W-E Controlled Environment Nitrile GlovesTechNiGlove 12″ ambidextrous Class 100 nitrile gloves have Microtextured Fingertips provide excellent grip on all surfaces. 100% nitrile gloves contain no natural rubber or silicone and meet stringent requirements for particles and extractables. The proprietary ESD formulation was developed for the Hard Disk Industry, and has a greater capacity to dissipate a static charge with a surface resistivity of 10-08
ohm/square per ESD-S11.11TN2000 DATA SHEET
-
Cleanroom Gloves, Controlled Environment Nitrile Gloves, ESD Apparel, TN2000 Gloves, TN2000W-E Controlled Environment Nitrile Gloves
Controlled Environment Nitrile Gloves – 12″ Ambidextrous White – X-Large
$320.30 Add to cartControlled Environment Nitrile Gloves – 12″ Ambidextrous White – X-Large
$320.30
SKU: TN2001W-E X-Large Controlled Environment Nitrile Gloves Categories: Cleanroom Gloves, Controlled Environment Nitrile Gloves, ESD Apparel, TN2000 Gloves, TN2000W-E Controlled Environment Nitrile GlovesTechNiGlove 12″ ambidextrous Class 100 nitrile gloves have Microtextured Fingertips provide excellent grip on all surfaces. 100% nitrile gloves contain no natural rubber or silicone and meet stringent requirements for particles and extractables. The proprietary ESD formulation was developed for the Hard Disk Industry, and has a greater capacity to dissipate a static charge with a surface resistivity of 10-08
ohm/square per ESD-S11.11TN2000 DATA SHEET
-
Cleanroom Gloves, Controlled Environment Nitrile Gloves, ESD Apparel, TN2000 Gloves, TN2000W-E Controlled Environment Nitrile Gloves
Controlled Environment Nitrile Gloves – 12″ Ambidextrous White – XX-Large
$320.30 Add to cartControlled Environment Nitrile Gloves – 12″ Ambidextrous White – XX-Large
$320.30
SKU: TN2001W-E XX-Large Controlled Environment Nitrile Gloves Categories: Cleanroom Gloves, Controlled Environment Nitrile Gloves, ESD Apparel, TN2000 Gloves, TN2000W-E Controlled Environment Nitrile GlovesTechNiGlove 12″ ambidextrous Class 100 nitrile gloves have Microtextured Fingertips provide excellent grip on all surfaces. 100% nitrile gloves contain no natural rubber or silicone and meet stringent requirements for particles and extractables. The proprietary ESD formulation was developed for the Hard Disk Industry, and has a greater capacity to dissipate a static charge with a surface resistivity of 10-08
ohm/square per ESD-S11.11TN2000 DATA SHEET
-
EM Eye Meter, Testers & Meters
CTM048-21 – EM Eye – ESD Event Meter
$4,403.00 Add to cartCTM048-21 – EM Eye – ESD Event Meter
$4,403.00
SKU: CTM048-21 EM Eye ESD Event Meter Categories: EM Eye Meter, Testers & MetersFEATURES:
* Detects, counts and measures ESD events that can damage ESD items and cause tool lock-ups, erratic behavior and parametric errors
* Calculates event magnitude for Charged Device Model (CDM), Human Body Model (HBM) and Machine Model (MM)
* Records all measurements to a microSD card for PC download
* Touchscreen display provides intuitive user interface
* Rechargeable lithium ion battery
* Assembled in the United States of America with Globally Sourced Materials
* NIST CalibratedCalibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration<https://staticcontrol.descoindustries.com/Calibration.aspx>.
U.S. Patents 6,563,319; 6,762,607; 7,525,316; 7,795,875
CONTACT US FOR MORE ITEMS AND ACCESSORIES
Video
Click here to to watch a video on this product.
-
EM Eye Meter, Personal Grounding Testers, Testers & Meters
CTC021 – ESD Sensor for EM Eye – ESD Event Meter
$960.35 Add to cartCTC021 – ESD Sensor for EM Eye – ESD Event Meter
$960.35
SKU: CTC021 - ESD Sensor for EM Eye – ESD Event Meter Categories: EM Eye Meter, Personal Grounding Testers, Testers & MetersFEATURES:
- Accessory for the CTM048-21<http://staticcontrol.descoindustries.com/SCSCatalog/Test-Instruments/EM-Eye-Meter/CTM048-21/> EM Eye – ESD Event Meter. Detects, counts and measures ESD events that can damage ESD items and cause tool lock-ups, erratic behavior and parametric errors
- ESD Model Test Settings
- Uses proprietary algorithms to calculate approximate values for CDM, HBM and MM test models
- 1kV Rating
- Measures ESD events as high as 1kV
- Assembled in the United States of America with Globally Sourced Materials
- This item is assembled and stocked in Chino, CA
CONTACT US FOR MORE ITEMS AND ACCESSORIES